Biomass boiler Pellet - Woodchips Pelletech Multiauto 18-35 Advantages :
Fuel : Crushed Wood - Woodchips , Core , Elia kernel , Pellet , Pellets of various kinds up to 36mm ,Various kinds of agricultural waste and wood cut to size . Maximum moisture content of Biomass Fuel up to 30% .
- Manufacturer : CaminoDesing / Greek made
- Extremely high performance and huge savings
- Flexibility in solid fuel combustion , as it handles all types of Pellet , with parallel combustion of wood.
- It has a fixed horizontal combustion system with automatic cleaning cycles.
- Extremely low power consumption - 375 watts maximum consumption.
- Automated System for cleaning the combustion chamber and heat exchanger.
- Automated Fuel Supply System , with special emphasis on safety as it has a flame return protection system in the fuel tank.
- Easy menu management with full parameters.
- Environmentally friendly boiler with low exhaust gas extraction.
Ο Biomass boiler Pellet - Woodchips Pelletech Multiauto is placed :
- In a detached house to replace an oil boiler or as alternative heating for parallel use.
- In an apartment in a block of flats to create autonomous heating.
- In new homes as central heating .
- In homes in combination with other heating systems such as solar thermal, geothermal, etc.
- Installation as a hot water production system .
- Control Panel
- Lambda Sensor
- Hot air blower Hot air blower
- Hydraulic kit
- Combustion chamber
- Ethernet interface system
- G SM modem system for internet management
- Management via smartphone with a special application
- Protection device that prevents the return of flame
- Shredding box that does not let the feed block
1. Additional horizontal air supply to the flame chamber that contributes to the uniform combustion of biomass, increasing flame chamber temperatures and system efficiency
2. Mechanism for cleaning the burner from ash residues
3. Automatic ash extraction mechanism in a container with overfill protection and alarm system
4. Patented high quality cast iron moving grate combustion system with flotation and combustion residue removal mechanism
5. Combustion chamber made of high quality, thick refractory concrete with a thermal resistance of over 1400 oC which helps to maintain high temperatures in the flame chamber and protect the boiler walls
6. Special flame flow cover made of high quality cast iron with holes for additional air supply and creation of secondary combustion, reduction of CO emissions and vertical increase of combustion efficiency
7. Vertical flame alternator with swirlers that create a turbulent flow in the exhaust gases resulting in a vertical reduction of their temperature and a dramatic increase in heat absorption
8. Automatic cleaning mechanism of the alternator by periodically shaking the turbines and removing the ash in a collection container, ensuring the stable performance of the boiler
9. Metal scraper for removing the residues of the alternator
10. Fuel storage silo of 100kg capacity with level sensor and alarm system
11. Double-bolted protection system with flame arrester valve to prevent flame return to the fuel compartment (BPS) Backburn Protection System
12. New generation high efficiency power supply motor that meets the new European directives with a consumption of only 40W
13. Low power ceramic resistor ignition system with low power consumption (170 watts) and rapid incandescent ignition
14. Fuel level control mechanism in the combustion chamber
Side view :
1. Metal scraper for removing residues from the heat exchanger
2. Vertical flame alternator with swirlers that create a turbulent flow in the exhaust gases resulting in a vertical reduction of their temperature and an impressive increase in efficiency
3. Electronically adjustable exhaust fan (extractor) that ensures the smooth flow of exhaust gases to the chimney, preventing the accumulation of smoke in the alternator and its unwanted blockage
4. Mechanism for cleaning the burner from ash residues
5. Automatic ash extraction mechanism in a container with protection system and alarm of overfilling